Pool Deck Resurfacing Contractors - Modesto, CA - Call (209) 661-7722
|
A swimming pool courtyard is a beautiful focal point especially for an upscale homestead. But sometimes it gets scarred by harsh weather or stains. If this happens, there is no reason at all for ripping out and rebuilding the pool deck. We propose resurfacing of a deck with stained or stamped overlays. Pool deck resurfacing saves money and time and the outcomes are beautiful. We are available in Modesto, Manteca, Country Club, Riverbank, Ripon, Oakdale, Stockton, Ceres, Patterson, Marced, Turlock, Livingston, Garden Acres, Tracy, and Atwater. Contact us on (209) 661-7722.
Resurfacing process Before we begin working on the concrete for decking, we have to make sure that drainage is well taken care of. There should be sufficient drains to take water away from the concrete surface to reduce the risk of staining. If there are any planters that would bring mud issues, we take them away and pour concrete to fill the space left. There are various steps involved in the preparation of the surface to ensure that the overlay succeeds. It is important that the sub-grade be prepared the right way and how to deal with concrete cracks and movement. The main objective is to repair the cracks; so the damaged parts are ripped out with crack chasers and filled with concrete resurfacer. If the cracks are caused by inadequate expansion joints, a new joint system should be introduced as needed. To produce a smooth and consistent surface for the intended overlay, the many birdbaths are filled with a repair mortar. Contact (209) 661-7722 now for free quotes. |
|
|
|
More on Pool Deck Resurfacing Contractors - Modesto, CA
Proper preparation is key in micro-coating. The profile is required to be clean and open in readiness for the micro-coating primer. The entire deck should be scrubbed with nylon grit brushes to clear off any contaminants. The size of damage on the pool deck determines the amount of the resurfacer to be used. A liquid release agent is applied to produce a flawless texture from the decorative tools. Expansion joints, marked with nails, are reopened before coloring.
The number of ways to decorate a pool deck is countless. Random overlapping patterns can be applied randomly to create attractive effects. Dark spots may be stained with earth tones. Coloring may take several workers because one person cannot handle the electric pump, spray, and brush the stains at the same time. The biggest job is staining and it takes several hours to be accomplished. To add a decorative element, a border can be created around the pool edges with darker tones of the deck color.
Our contractors have been carrying out pool deck resurfacing for long and it is one of our most fascinating projects. Throughout Modesto, we have solved major pool deck issues in residential houses, spas, and condominiums.
Overlays are good solutions particularly in pools that continue functioning during the repair project. The success of pool deck resurfacing is dependent on the technique used by the contractor.
How to choose the right pool deck resurfacer
A resurfacing system should strike a balance between performance and beauty. There are various factors we put into consideration before using a resurfacer on a pool deck surface.
The Surface Condition
If the pool deck is full of gouges, cracks, or out of level, we use a high-end builder resurfacer which can be used at a ¼” thickness and above. Excess water in the concrete element is a big issue to overlays which inhibit proper breathing of concrete. The level of moisture in the existing the concrete can be estimated through a number of steps and when it is extremely high, a permeable overlay should be used so that it can allow free evaporation of the moisture.
Prevailing Conditions
The chosen overlay must be hardy enough to cope with any environmental condition around. Perhaps it will be subjected to thawing and freezing or maybe the pool has a high traffic. Most resurfacers can cope with chemical abuse and dirt while some are most suitable for aggressive weather conditions.
Ease of Application
Some resurfacing products are pre-blended and all that’s needed is the use of water. Others involve mixing additives and the necessary pigments. While some overlays can be applied on well-prepared surfaces, some need the use of a bonding agent before actual placement. Self-leveling resurfacers are the easiest because they cover surfaces in less time than when a trowel is used.
Give us a call through
The number of ways to decorate a pool deck is countless. Random overlapping patterns can be applied randomly to create attractive effects. Dark spots may be stained with earth tones. Coloring may take several workers because one person cannot handle the electric pump, spray, and brush the stains at the same time. The biggest job is staining and it takes several hours to be accomplished. To add a decorative element, a border can be created around the pool edges with darker tones of the deck color.
Our contractors have been carrying out pool deck resurfacing for long and it is one of our most fascinating projects. Throughout Modesto, we have solved major pool deck issues in residential houses, spas, and condominiums.
Overlays are good solutions particularly in pools that continue functioning during the repair project. The success of pool deck resurfacing is dependent on the technique used by the contractor.
How to choose the right pool deck resurfacer
A resurfacing system should strike a balance between performance and beauty. There are various factors we put into consideration before using a resurfacer on a pool deck surface.
The Surface Condition
If the pool deck is full of gouges, cracks, or out of level, we use a high-end builder resurfacer which can be used at a ¼” thickness and above. Excess water in the concrete element is a big issue to overlays which inhibit proper breathing of concrete. The level of moisture in the existing the concrete can be estimated through a number of steps and when it is extremely high, a permeable overlay should be used so that it can allow free evaporation of the moisture.
Prevailing Conditions
The chosen overlay must be hardy enough to cope with any environmental condition around. Perhaps it will be subjected to thawing and freezing or maybe the pool has a high traffic. Most resurfacers can cope with chemical abuse and dirt while some are most suitable for aggressive weather conditions.
Ease of Application
Some resurfacing products are pre-blended and all that’s needed is the use of water. Others involve mixing additives and the necessary pigments. While some overlays can be applied on well-prepared surfaces, some need the use of a bonding agent before actual placement. Self-leveling resurfacers are the easiest because they cover surfaces in less time than when a trowel is used.
Give us a call through